Pilz PSS67 F 16DI SB-T Manuel d'utilisateur télécharger pdf (Page 11)

2-1Operating Manual: PSS67 F 16DI SB-T

Overview

The module PSS67 F 16DI SB-T can be used in a rugged industrial

environment up to protection type IP67.

It has 16 digital inputs and 4 dedicated test pulse outputs.

The inputs are suitable for connecting single or dual-channel safety-related

input devices, with or without test pulses. The inputs can be assigned to

two I/O-Groups on SafetyBUS p.

The 4 test pulse outputs are available via 8 M12 plug-in connectors. The

test pulses are permanently assigned to the inputs. The test pulse outputs

can also be configured as 24 VDC outputs.

The PSS67 F 16DI SB-T requires a 24 V supply, which provides power to

both the module electronics and the dedicated test pulse outputs.

The module is isolated from SafetyBUS p through optocouplers.

NOTICE

Before installing the module you should read and take note of the

information contained in the “SafetyBUS p Safety Manual”.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

Pas de commentaire

Pilz PSS67 F 16DI SB-T Manuel d'utilisateur Page 11