Pilz PSENvip RL D P Manuel d'utilisateur télécharger pdf (Page 89)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany

Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]

7-5

7.2 Initial commissioning

7 Commissioning

Guidelines for the mechanical alignment of transmitter and receiver:

 When making the alignment, the nuts on the bolt connecting the

PSENvip to the adjustment plate should only be hand-tightened.

 There are three notches on the adjustment plate and auxiliary adjust-

ment plate for rotating the transmitter and receiver. The transmitter or

receiver is inserted into the slot holes on the adjustment plate (adjust-

ment direction B).

 Push the screwdriver blade into the middle notch of the auxiliary ad-

justment plate and adjustment plate.

 Rotate the screwdriver blade in the required direction.

 You can use the left or right-hand notch to rotate the transmitter or

receiver even further to the left or right.

Fig. 7-3: Adjustment direction B

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 156 157

Pas de commentaire

Pilz PSENvip RL D P Manuel d'utilisateur Page 89